The thermostatic radiator valve Eclipse 300 has a unique integrated flow limiter that eliminates overflows. The required flow rate can be adjusted directly at the valve with a twist. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start-up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary.
Heating and cooling systems
Control
Flow limitation
Shut-off
DN 15
PN 10
Max. working temperature: 120° C, with protection cap or actuator 100° C
Min. working temperature: -10° C
The flow can be stepless pre-set within the range: 30-300 l/h
Delivery setting: Commissioning
Max. differential pressure: 60 kPa (<30 dB(A))
Min. differential pressure: 30 – 300 l/h = 20 kPa
Valve body: Corrosion resistant Gunmetal.
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass, PPS (polyphenylsulphide)
The complete thermostatic insert can be replaced using the HEIMEIER fitting tool without draining the system.
Spindle: Niro-steel spindle with double O-ring sealing.
Valve body and fittings are nickel-plated.
THE, country code, flow direction arrow, DN, HF (High Flow) and KEYMARK-Designation.
Green protection cap.
Valves meet the following requirements:
– KEYMARK certified and tested to DIN EN 215, series D.
The female-threaded version is designed for connection to threaded pipe, or in conjunction with compression fittings, to copper precision steel or multi-layer pipe. The male-threaded version (EN 16313), in conjunction with the appropriate compression fittings, permits connection to plastic, copper, precision steel or multilayer pipe.
HEIMEIER M30x1,5
*) SW1: DN 15 = 27 mm SW2: DN 15 = 30 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.
| DN | D | Article Nr | d2 | l3 | l4 | l5 | H1 | Flow range [l/h] |
|---|---|---|---|---|---|---|---|---|
| 15 | Rp1/2 | 3951-02.000 | R1/2 | 29 | 58 | 27 | 26 | 30-300 |
*) SW1: DN 15 = 27 mm SW2: DN 15 = 30 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.
| DN | D | Article Nr | d2 | I1 | I2 | H2 | Flow range [l/h] |
|---|---|---|---|---|---|---|---|
| 15 | Rp1/2 | 3952-02.000 | R1/2 | 66 | 95 | 21,5 | 30-300 |
*) SW1: DN 15 = 27 mm SW2: DN 15 = 30 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.
| DN | Article Nr | d1 | d2 | H2 | Flow range [l/h] |
|---|---|---|---|---|---|
| 15 | 3956-02.000 | G3/4 | R1/2 | 21,5 | 30-300 |
*) SW1: DN 15 = 27 mm SW2: DN 15 = 30 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.
| DN | D | Article Nr | d2 | l3 | l4 | H1 | Flow range [l/h] |
|---|---|---|---|---|---|---|---|
| 15 | Rp1/2 | 3950-02.000 | R1/2 | 29 | 58 | 32,5 | 30-300 |
for Eclipse. Color orange.
| Article Nr | EAN |
|---|---|
| 3930-02.142 | 4024052937714 |
for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Female thread connection Rp1/2. Metal-to-metal joint. Brass nickel-plated. Support sleeves should be used for a pipe wall thickness of 0.8 – 1 mm. Follow the specifications of the pipe manufacturer.
| Ø Pipe | DN | Article Nr | EAN |
|---|---|---|---|
| 14 | 15 (1/2”) | 2201-14.351 | 4024052174713 |
| 15 | 15 (1/2”) | 2201-15.351 | 4024052175017 |
| 16 | 15 (1/2”) | 2201-16.351 | 4024052175116 |
for copper or precision steel pipe with a 1 mm wall thickness. Brass.
| Ø Pipe | L | Article Nr | EAN | |
|---|---|---|---|---|
| 15 | 26,0 | 1300-15.170 | 4024052127917 | |
| 16 | 26,3 | 1300-16.170 | 4024052128419 |
for Alu/PEX multi-layer pipe according to DIN 16836. Female thread connection Rp1/2. Nickel-plated brass.
| Ø Pipe | Article Nr | EAN |
|---|---|---|
| 16 x 2 | 1335-16.351 | 4024052138616 |
For clamping plastic, copper, precision steel or multi-layer pipes. Nickel-plated brass.
| L | Article Nr | EAN | |
|---|---|---|---|
| G3/4 x R1/2 | 26 | 1321-12.083 | 4024052308415 |
for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Metal-to-metal joint. Nickel-plated brass. With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.
| Ø Pipe | Article Nr | EAN |
|---|---|---|
| 12 | 3831-12.351 | 4024052214211 |
| 14 | 3831-14.351 | 4024052214310 |
| 15 | 3831-15.351 | 4024052214617 |
| 16 | 3831-16.351 | 4024052214914 |
| 18 | 3831-18.351 | 4024052215218 |
for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Soft sealed, max. 95°C. Nickel-plated brass.
| Ø Pipe | Article Nr | EAN |
|---|---|---|
| 15 | 1313-15.351 | 4024052515851 |
| 18 | 1313-18.351 | 4024052516056 |
for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel plated brass.
| Ø Pipe | Article Nr | EAN |
|---|---|---|
| 12x1,1 | 1315-12.351 | 4024052136018 |
| 14x2 | 1311-14.351 | 4024052134618 |
| 16x1,5 | 1315-16.351 | 4024052136117 |
| 16x2 | 1311-16.351 | 4024052134816 |
| 17x2 | 1311-17.351 | 4024052134915 |
| 18x2 | 1311-18.351 | 4024052135110 |
| 20x2 | 1311-20.351 | 4024052135318 |
for Alu/PEX multi-layer pipe according to DIN 16836. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel-plated brass.
| Ø Pipe | Article Nr | EAN |
|---|---|---|
| 16x2 | 1331-16.351 | 4024052137312 |
| 18x2 | 1331-18.351 | 4024052137411 |
complete with case, box spanner and replacement seals, for replacing thermostatic inserts without draining off the heating system (for DN 10 to DN 20).
| Article Nr | EAN | |
|---|---|---|
| Fitting tool | 9721-00.000 | 4024052298914 |
for differential pressure measurement at thermostatic valve bodies with TA-SCOPE balancing instrument.
| Article Nr | EAN |
|---|---|
| 9790-01.890 | 4024052942114 |
with automatic flow limiter for Eclipse 300. For thermostatic valve bodies marked with "HF" (High Flow), from 2021.
| Article Nr | EAN |
|---|---|
| 3951-00.300 | 4024052054428 |
EN
DE
NL
FR
RU
PL
