Multilux V Eclipse is connected in 2-pipe systems to radiators with a lower 2-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves. For radiators with integrated valves Multilux V Eclipse is also used as connection fitting without thermostatic head. The valve has a unique integrated flow limiter that eliminates over flows. The required flow rate can be adjusted with one twist directly at the valve. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary. Centre-to-centre distance of connections 50 mm. Thermostatic insert and shut-off insert are interchangeable. Therefore the valve is suitable for installation both left and right side of the radiator.
2-pipe heating systems
Control
Flow limitation
Shut-off
Drain-off
Filling
DN 15
PN 10
Max. working temperature: 120 °C, with cover 90 °C.
Min. working temperature: –10 °C
The flow can be stepless pre-set within the range: 10-150 l/h. Delivery setting: Commissioning setting
Max. differential pressure: 60 kPa (<30 dB(A))
Min. differential pressure: 10 – 100 l/h = 10 kPa
100 – 150 l/h = 15 kPa
Valve body: Corrosion resistant Gunmetal.
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass, PPS (polyphenylsulphide) The complete thermostatic insert can be replaced using the fitting tool without draining the system.
Spindle: Niro-steel spindle with double O-ring sealing.
Cover: ABS
Valve body and fittings are nickel-plated
THE and II+ Designation. Protection cap orange.
Adapters for R1/2 and G3/4, for radiator connections. Tolerance compensation ±1,0 mm with special union nuts and flexible flat seal system for installation free of tension.
G3/4 male thread for compression fittings for plastic, copper, precision steel or multi-layer pipe.
HEIMEIER M30x1.5
Female thread Nickel plated gunmetal
| Radiator connection | Flow range [l/h] | Article Nr | EAN |
|---|---|---|---|
| Rp1/2 / G3/4 | 10-150 | 3866-02.000 | 4024052938612 |
Female thread Nickel plated gunmetal
| Radiator connection | Flow range [l/h] | Article Nr | EAN |
|---|---|---|---|
| Rp1/2 / G3/4 | 10-150 | 3865-02.000 | 4024052938513 |
made of plastic. For angle and straight forms.
| Colour | EAN | Article Nr |
|---|---|---|
| weiß RAL 9016 | 4024052459254 | 3850-50.553 |
| verchromt | 4024052553617 | 3850-12.553 |
for Eclipse. Colour orange
| EAN | Article Nr |
|---|---|
| 4024052937714 | 3930-02.142 |
for 1/2”-hose connection.
| EAN | Article Nr |
|---|---|
| 4024052114511 | 0301-00.102 |
for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone). Metal-to-metal joint. Brass nickel-plated. With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.
| Ø Pipe | EAN | Article Nr |
|---|---|---|
| 12 | 4024052214211 | 3831-12.351 |
| 15 | 4024052214617 | 3831-15.351 |
| 16 | 4024052214914 | 3831-16.351 |
| 18 | 4024052215218 | 3831-18.351 |
for copper or precision steel pipe with a wall thickness of 1 mm.
| Ø Pipe | L | Article Nr | EAN |
|---|---|---|---|
| 12 | 25,0 | 1300-12.170 | 4024052127016 |
| 15 | 26,0 | 1300-15.170 | 4024052127917 |
| 16 | 26,3 | 1300-16.170 | 4024052128419 |
| 18 | 26,8 | 1300-18.170 | 4024052128815 |
for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone). Soft sealed, max. 95°C. Nickel-plated brass.
| Ø Pipe | EAN | Article Nr |
|---|---|---|
| 15 | 4024052515851 | 1313-15.351 |
| 18 | 4024052516056 | 1313-18.351 |
for multi-layer pipes. Connection male thread G3/4. Nickel-plated brass.
| Ø Pipe | EAN | Article Nr |
|---|---|---|
| 16x2 | 4024052137312 | 1331-16.351 |
for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone). Nickel plated brass.
| Ø Pipe | EAN | Article Nr |
|---|---|---|
| 14x2 | 4024052134618 | 1311-14.351 |
| 16x2 | 4024052134816 | 1311-16.351 |
| 17x2 | 4024052134915 | 1311-17.351 |
| 18x2 | 4024052135110 | 1311-18.351 |
| 20x2 | 4024052135318 | 1311-20.351 |
for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone). Nickel plated brass.
| EAN | Article Nr |
|---|---|
| 4024052120710 | 0520-00.093 |
for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone). Nickel plated brass.
| EAN | Article Nr | |
|---|---|---|
| Montagegerät | 4024052298914 | 9721-00.000 |
| Ersatzdichtungen | 4024052299010 | 9721-00.514 |
for differential pressure measurement at thermostatic valve bodies with TA-Scope balancing instrument.
| EAN | Article Nr |
|---|---|
| 4024052942114 | 9790-01.890 |
with automatic flow limiter for Eclipse.
| EAN | Article Nr |
|---|---|
| 4024052940912 | 3930-02.300 |
consisting of 2 adapter pieces G3/4 x G3/4. Brass nickel-plated.
| Execution | Article Nr | EAN | |
|---|---|---|---|
| Set 1 | Achsabstand min. 40/50 bis max. 60/50 | 1354-02.362 | 4024052840816 |
| Set 2 | Achsabstand min. 35/50 bis max. 65/50 | 1354-22.362 | 4024052840915 |
EN
DE
NL
FR
RU
PL
