Eclipse thermostatic valve – Dynamischer hydraulischer Abgleich von Fußbodenheizungen und Heizkörpersystemen

Angle

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l3	l4	l5	H1	Flow range [l/h]	EAN
10	Rp3/8	3931-01.000	R3/8	26	52	23,5	23,5	10-150	4024052929313
15	Rp1/2	3931-02.000	R1/2	29	58	27	23,5	10-150	4024052929412
20	Rp3/4	3931-03.000	R3/4	34	66	29	21,5	10-150	4024052930715

Angle

with reduced lengths. Brass. Not suitable for compression fitting for multi layer pipes *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l3	l4	l5	H1	Flow range [l/h]	EAN
10	Rp3/8	3461-01.000	R3/8	24	49	20	24	10-150	4024052932313
15	Rp1/2	3461-02.000	24	49	20	24	23,5	10-150	4024052932412
20	Rp3/4	3461-03.000	R3/4	30	63	26	21,5	10-150	4024052932511

Angle

with Viega press connection 15 mm *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d2	Article Nr.	l3	l4	H1	Flow range [l/h]	EAN
15	R1/2	3941-15.000	29	58	23,5	10-150	4024052938018

Angle

with male thread G 3/4 *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d1	Article Nr.	d2	l3	l4	H1	ow range [l/h]	EAN
15	G3/4	3935-02.000	R1/2	29	58	21,5	10-150	4024052930616

Straight

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l1	l2	H2	ow range [l/h]	EAN
10	Rp3/8	3932-01.000	R3/8	59	85	21,5	10-150	4024052929511
15	Rp1/2	3932-02.000	R1/2	66	95	10-21,5	10-150	4024052929610
20	Rp3/4	3932-03.000	R3/4	74	106	23,5	10-150	4024052929917

Straight

with reduced lengths *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l1	l2	H2	ow range [l/h]	EAN
10	Rp3/8	3462-01.000	R3/8	50	76	22,5	10-150	4024052932610
15	Rp1/2	3462-02.000	R1/2	55	83	22,5	10-150	4024052932719
20	Rp3/4	3462-03.000	R3/4	65	97	22,5	10-150	4024052932818

Straight

with Viega press connection 15 mm *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d2	Article Nr.	l1	H2	ow range [l/h]	EAN
15	R1/2	3942-15.000	66	21,5	10-150	4024052938117

Straight

with male thread G 3/4 with Viega press connection 15 mm *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d1	Article Nr.	d2	H2	ow range [l/h]	EAN
15	G3/4	3936-02.000	R1/2	21,5	10-150	4024052930814

Straight

Double angle connection to radiator lef *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.Double angle connection to radiator left

DN	D	Article Nr.	d2	l1	H2	ow range [l/h]	EAN
15	Rp1/2	3944-02.000	R1/2	66	21,5	10-150	4024052933013

Axial

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l3	l4	H1	ow range [l/h]	EAN
10	Rp3/8	3930-01.000	R3/8	26	52	31,5	10-150	4024052929115
15	Rp1/2	3930-02.000	R1/2	29	58	31,5	10-150	4024052929214

Axial

with reduced lengths *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l3	l4	H1	ow range [l/h]	EAN
10	Rp3/8	3460-01.000	R3/8	24,5	50	34,5	10-150	4024052932016
15	Rp1/2	3460-02.000	R1/2	26	53	34,5	10-150	4024052932115
20	Rp3/4	3460-03.000	R3/4	30	63	34,5	10-150	4024052932214

Axial

with male thread G 3/4 *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d1	Article Nr.	d2	l3	l4	H1	ow range [l/h]	EAN
15	G3/4	3937-02.000	R1/2	29	58	31,5	10-150	4024052930913

Double angle

Double angle connection to radiator left *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l3	l4	ow range [l/h]	EAN
10	Rp3/8	3933-01.000	R3/8	26	52	10-150	4024052931019
15	Rp1/2	3933-02.000	R1/2	29	58	10-150	4024052931217

Double angle

with male thread G 3/4 *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d1	Article Nr.	d2	l3	l4	ow range [l/h]	EAN
15	G3/4	3938-02.000	R1/2	29	58	10-150	4024052931316

Double angle

Double angle connection to radiator right *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	D	Article Nr.	d2	l3	l4	ow range [l/h]	EAN
10	Rp3/8	3934-01.000	R3/8	26	52	10-150	4024052931118
15	Rp1/2	3934-02.000	R1/2	29	58	10-150	4024052931415

Double angle

with male thread G 3/4 *) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm Values H1 and H2 are at the bearing surface thermostatic head or actuator.

DN	d1	Article Nr.	d2	l3	l4	ow range [l/h]	EAN
15	G3/4	3939-02.000	R1/2	29	58	10-150	4024052931514

Accessories

Setting key for Eclipse. Color orange.

Article Nr.	EAN
3930-02.142	4024052937714

Accessories

Compression fitting for copper or precision steel pipe according to DIN EN 1057/10305-1/2.

Ø Pipe	DN	Article Nr.	EAN
12	10 (3/8")	2201-12.351	4024052174614
15	15 (1/2")	2201-15.351	4024052175017
16	15 (1/2")	2201-16.351	4024052175116
18	20 (3/4")	2201-18.351	4024052175215

Accessories

Support sleeve for copper or precision steel pipe with a 1 mm wall thickness. Brass.Support sleeve for copper or precision steel pipe with a 1 mm wall thickness. Brass.

Ø Pipe	L	Article Nr.	EAN
12	25,0	1300-12.170	4024052127016
15	26,0	1300-15.170	4024052127917
16	26,3	1300-16.170	4024052128419 1300-16.170
18	26,8	1300-18.170	4024052128815

Accessories

Compression fitting for Alu/PEX multi-layer pipe according to DIN 16836.

Ø Pipe	EAN	Article Nr.
16 x 2	4024052138616	1335-16.351

Accessories

Double connection fitting

	L	Article Nr.	EAN
G3/4 x R1/2	26	1321-12.083	4024052308415

Accessories

Compression fitting for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone).

Ø Pipe	EAN	Article Nr.
12	4024052214211	3831-12.351
15	4024052214617	3831-15.351
16	4024052214914	3831-16.351
18	4024052215218	3831-18.351

Accessories

Compression fitting for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G 3/4 according to DIN EN 16313 (Eurocone).

Ø Pipe	EAN	Article Nr.
15	4024052515851	1313-15.351
18	4024052516056	1313-18.351

Accessories

for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel plated brass.

Ø Pipe	EAN	Article Nr.
14x2	4024052134618	1311-14.351
16x2	4024052134816	1311-16.351
17x2	4024052134915	1311-17.351
18x2	4024052135110	1311-18.351
20x2	4024052135318	1311-20.351

Accessories

for Alu/PEX multi-layer pipe according to DIN 16836. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel-plated brass

Ø Pipe	EAN	Article Nr.
16x2	4024052137312	1331-16.351

Compression fitting

for Alu/PEX Verbundrohr according to DIN EN 16313

Ø Pipe	EAN	Article Nr.
16x2	4024052138616	1335-16.351

Accessories

Fitting tool complete with case, box spanner and replacement seals, for replacing thermostatic inserts without draining off the heating system (for DN 10 to DN 20).